Cat. no. TS005F
CROP TOP SLIM FIT
A fitted crop top with a short length designed to flatter and emphasize the silhouette. The classic crew neckline and short sleeves create a simple, timeless base that can be used across a variety of collections. Before starting mass production, we recommend making a sample garment using the intended fabric and verifying the fit, finished garment measurements, and fabric shrinkage.
Size range: XXS–XXL
XXSXSSMLXLXXL
The files include every size in the range.
349,00 PLN
DXF files available to download right after purchase
| Description | What you get | |
|---|---|---|
| DXF | PLT | |
The style is designed for products that require a closer fit to the body. It works particularly well for casual, fashion and athleisure collections. Perfect for: • ACTIVE and athleisure collections • casual collections • youth fashion • production in stretch jersey fabrics Sample garment fabric: Single jersey, 190–200 GSM Composition: 92% cotton / 8% elastane Neck ribbing: Rib knit, 280–320 GSM Composition: 95% cotton, 5% elastane | For studios using CAD or 3D software. The full size range, in two versions:
Also included:
Before bulk production we recommend a test sample in the target fabric. | No CAD software needed — ready-made cutting layouts to print on a plotter or send straight to the sewing room.
Pieces of one size face the same direction. If your fabric must be cut with every piece in one direction (nap, sheen, one-way print), contact us — we will prepare a custom layout for your production. Before buying, check that the PLT format works with your plotter. Before bulk production we recommend a test sample in the target fabric. |
Description
The style is designed for products that require a closer fit to the body. It works particularly well for casual, fashion and athleisure collections.
Perfect for: • ACTIVE and athleisure collections • casual collections • youth fashion • production in stretch jersey fabrics
Sample garment fabric: Single jersey, 190–200 GSM Composition: 92% cotton / 8% elastane
Neck ribbing: Rib knit, 280–320 GSM Composition: 95% cotton, 5% elastane
What you get — DXF
For studios using CAD or 3D software. The full size range, in two versions:
- with seam allowances — for CAD software: Inventex, Optitex, Gerber, Assyst and other compatible systems
- without seam allowances — for 3D software: CLO 3D, Browzwear and other compatible tools
Also included:
- finished garment measurement chart — for checking the dimensions of the sewn sample
- reference cutting layouts with estimated fabric consumption for 90, 150 and 180 cm widths
- recommended fabrics — type, composition and weight of the prototype fabric, suggested wovens and knits
- list of pattern pieces — to check the pattern set is complete
- reference technical drawing — silhouette, proportions and key details
Before bulk production we recommend a test sample in the target fabric.
What you get — PLT
No CAD software needed — ready-made cutting layouts to print on a plotter or send straight to the sewing room.
- optimised cutting layouts for every size, with all pieces and seam allowances
- three fabric widths included — 90, 150 and 180 cm
- less fabric waste — layouts made with automatic nesting software, adapted to the type of woven or knit fabric
- recommended fabrics — type, composition and weight of the prototype fabric, suggested wovens and knits
- list of pattern pieces — to check the pattern set is complete
- reference technical drawing — silhouette, proportions and key details
Pieces of one size face the same direction. If your fabric must be cut with every piece in one direction (nap, sheen, one-way print), contact us — we will prepare a custom layout for your production.
Before buying, check that the PLT format works with your plotter. Before bulk production we recommend a test sample in the target fabric.
Compatibility
- DXF —
- DXF-AAMA standard (base size) with an RUL grading table (ANSI/AAMA-292-B), units: mm. For import into apparel CAD software that supports DXF-AAMA with an RUL file, e.g. Gerber AccuMark, Lectra Modaris, Optitex, Assyst, InvenTex, CLO3D. Prepared in InvenTex PDS. General CAD software will open the base size only, without grading.
- PLT —
- HP-GL language for plotters and wide-format printers, scale 1:1. The print width is given in the file description.
The files include a 10 × 10 cm control square — check its size on the printout before cutting.
Not sure? Download a free pattern and check the format in your software.
Similar patterns
